Step 1 - ASSEMBLE: Your organiser will arrive folded flat. Simply open it up and push down the floor board already placed inside the main compartment. Your cooler bag can be placed inside your organiser, or kept outside as you desire. There is also a space separator for your main compartment.

Step 2 - ROLL-ON COVER: Your organiser has a roll-on cover that zips shut to keep your possessions secure. Undo the toggle at the back to roll this on. When you don't need it just roll it up and secure it again using the toggle.

Step 3 - POSITION ON SEAT: The buckles at the back help to keep your organiser from sliding forward. Attach these to the lower part of the seat-belt of the empty seat you are using before you set-off.

Pro-tips for your cooler bag:

• Your cooler bag is insulated. Your myXplorer Ice Floor is our food-safe ice pack that is specially designed to fit the entire floor of your cooler bag, giving all-day cooling for your food and drinks when you need it!
• If your food is getting too cold, consider putting your Ice Floor in the freezer for shorter periods before-hand.
• If your Ice Floor shows a small bump when it freezes, worry not :). It just means the liquid waswas not evenly distributed at the time of freezing, and this is totally fine.

For Any Issues With Your Order

If you have any issues, please allow us to fix them for you ASAP by simply replying to this email (lucy@myxplorer.com). I'll personally help you as soon as I can.

Step 1 - ASSEMBLE: Your bin has arrived folded flat. Simply open it up, and push the included floor board down to the bottom to give your bin its shape.

Step 2 - ADD A BIN LINER: Your bin has magnets inside to keep a bin liner in place. The inside of the bin is waterproof and wipes clean, but I highly recommend using small bin liners for easier regular disposal of rubbish, and to reduce the need to clean your myXplorer bin. Simply place the bin liner inside and clip it in place using the 4 magnets. Now, you’re ready to zip shut your bin for a neat appearance that hides the bin-liner. 

Note: The bin-liners themselves are not included, but generic small liners can be purchased in the household section of most supermarkets. 

Step 3 - POSITION IN VAN / CAR: The adjustable buckle strap allows you to secure the bin around the front passenger seat head-rest. Simply secure the buckle around the head rest and then adjust for a secure fit.

• For driver use: Position on the front passenger head-rest facing frontwards.
• For rear passenger use: Position on the front passenger head-rest facing BACKWARDS. 
• For rear passenger use (alternative): In some (not all) cars another option is to attach it to the front centre console and face it towards rear seat passengers for their ease of access (great if you have kids sharing it). To do this, raise the centre console lid, place the strap inside the lid, and close avoiding the buckle. The limitation of this placement option is that re-opening the centre console will disrupt the placement, so you may prefer the headrest options. 

Pro-tips when using:

• Use a damp cloth to clean the inside of the bin when needed.
• Shopping bags also work great if you have run out of bin-liners.
• If you also own the myXplorer Van and Car organiser, your bin is designed to sit snuggly inside the organiser, giving an additional placement option.

If you run into any hiccups or have questions, just email me at lucy@myxplorer.com. I’ll personally get back to you as soon as I can to sort things out!  

Step 1 - UNFOLD: Your seat covers arrive folded – simply open them up to use.  

Watch demo video of Steps 2 & 3

Step 2 - DRIVER SEAT: Start with the driver’s seat. Fit the cover by placing it over the head rest first and then pulling down over the seat. Adjust the fit around the seat by pulling the material tight across the front of the seat as you pull the cover down to ensure a snug fit. The seat covers are elasticated so pull the cover taut around the underneath of the seat to maximise your comfort.  

Step 3 - PASSENGER BENCH: Next fit the passenger seats. Again, fit the cover by placing it over the head rests first. As you pull the cover down, make sure the middle seat belt is lined up with the seat belt opening. Pull the cover taut around the underneath of the seat. 

Pro-tips:

• Your covers are waterproof – simply wipe dry any spills! 
• Use a damp cloth to clean the covers when they get dirty.

If you have any issues, please allow us to fix them for you ASAP. Just email me at lucy@myxplorer.com, and I’ll personally get back to you as soon as I can to sort things out!